Home > Products > Ruwac Industrial Vacuums > Wet Vacuums

Ruwac Wet Vacuums: WSP Series

The Wet Vacuum is designed for the pickup of liquids and solids. Unlike many industrial vacuums, emptying our machine is simple. Liquids are emptied by our powerful return pump at 38 gallons a minute. A manual blast gate is also supplied as a drain option. Solids are then emptied by a foot activated lever with an 8” discharge, ensuring that all solids are removed from the cyclone bottom. This engineered emptying mechanism allows the operator to empty the vacuum without ever taking the machine apart or resting the vacuum heads on the ground, potentially causing loss of vacuum and dented float assemblies. If the operator wanted to rinse the inside of the unit with a hose, the motor deck can be easily removed by releasing two latches allowing easy access.

WSP Wet Vacuum, Specifications and Options:

A.	Modular Oval Construction, maximum design flexibility, upgradeable
B.	Fiberglass Reinforced Compression Cast Composite, will not Rust!
C.	Lever actuated 8" solids discharge for easy emptying
D.	Tip resistant counter-balanced base
E.	Powerful By-pass vacuum producer
F.	Manual 2" external liquid drain
G.	2" vacuum inlet
H.	Heavy duty non-marking swivel casters, front; 12" pneumatic tires, rear
I.	Positive closure float system
J.	Optional return pump for liquid discharge, 38 gal/min
	Easily disassembles for cleaning

Specific Models

  *220 single phase available

WSP2000

Only Ruwac, known for their filtration of dry material, could use their ingenuity to develop the best industrial wet vacuum. Same Fiberglass Reinforced Compression Cast Composite so you never have to worry about the housing denting or rusting. The WSP2000 has a liquid capacity of 15 gallons. An optional return pump allows the operator to vacuum and pump liquids simultaneously.

 *220 single phase available

 Download video of WSP2000 in Action!

Vacuum and pumping water from rooftops

Back To Top

WSP4000

Need additional capacity, the WSP4000 offers 35 gallons. Same Fiberglass Reinforced Compression Cast Composite so you never have to worry about the housing denting or rusting. The WSP400 also offers an optional return pump that allows the operator to vacuum and pump liquids simultaneously.

* 220 single phase available

Back To Top

H – Heavy duty non-marking casters: rear with pneumatic tires  

Ruwac vacuums have large heavy duty non-marking swivel casters on the front and large heavy duty pneumatic tires on the rear. Large rear tires allow the wet vacuum to handle many different terrains. They are very durable and stay on! 






I – Positive closer float
The Wet vacuums have a float shutoff to prevent overflowing.

Back to Top

J – Optional 38 gallon/minute return pump available for both models.

Easily disassembles easily for cleaning



Back to Top

Can be customized:



Ruwac in Action

When the Wilshire hotel in Beverly Hills,CA required a vacuum for their kitchen wash down, they relied on Ruwac. Prior to contacting Ruwac they had been using other drum style vacuums with an extremely high burn out rate. The WSP series allowed them to safely remove the material into the fiberglass housing. Maneuverability was a cinch even up and down stairs. The pump allows for the liquids to be safely disposed of without manual lifting.  With multiple units in place, cleaning up water from any area of the facility is now made simple.

RECENT APPLICATIONS:
Removal of liquids from pressure washers
Vacuum and pumping water from rooftops
Vacuuming and pumping liquids from a parts washer

Click here to download a pdf brochure on the wet vacuum

Back to Top

Contact us to learn more about wet vacuums from Ruwac