Latta Equipment

Home > Products > Ruwac Industrial Vacuums > The Red Line


The Red Line
 

Single phase 120 & 220 volt industrial vacuums

Filtration! Filtration! Filtration!

 Our single phase vacuums are the best in the world for performance, durability and filtration. Only a Ruwac industrial vacuum includes the finest filtration along with a drop down dustpan, and a grounded fiberglass housing. Unlike a steel vacuum or canister type machine; you never have to worry about denting the housing. Think fine dust will kill the filter quickly? Not with a Ruwac filter system. Our state of the art filtration system stops even the particles you can’t see, all while maintaining the suction you depend on.

Single Phase Industrial Vacuums

Single Phase Features, Specifications and Options:

  1. Modular Oval Construction, designed for flexibility, upgradeable
  2. Fiberglass Reinforced Compression Cast Composite, fully grounded
  3. Long Life Oversized Dustless filter system, 99.9% @ .5 microns
    HEPA, ULPA & Active Charcoal Filters available
  4. Lever Actuated Drop Down Dust Pan for easy emptying
  5. Tip resistant counter-balanced base, with low level hose inlet
  6. Individually cooled bypass motors for motor-bearing longevity
  7. Inclusive sound suppression for quiet operation
  8. Manual external filter shaker control for easy filter maintenance
    Reverse pulse or motorized filter shaker available
  9. Heavy duty non-marking casters: rear with locking brakes
  10. Cast deflector to knock material out of the air stream

 The Red Line Vacuum Comparison Chart

Model Voltage Vacuum
(H2O") / HG")
Volume
CFM
Capacity  L x W x H
(Inches)
Weight
(lbs.)
WNS1000
Baby Red

120*

107" / 7.9

112 CFM

 9 gal

32 x 20 x 35

85

WNS2220
Little Red

120*

97" / 7.2

200 CFM

 9 gal

32 x 20 x 35

90

WS2220
Quiet Red

120*

97" / 7.2

200 CFM

 9 gal

32 x 20 x 37

115

WS2320-120
Red Raider

120*

75" / 5.5

288 CFM

 9 gal

32 x 20 x 51

138

WS2320-220
Red Raider2

240

98" / 7.2

340 CFM

 9 gal

32 x 20 x 51

138

WS3420
Big Red

240

95" / 7.0

475 CFM

 24 gal

37 x 34 x 80

300

*220 single phase available

Video of WS2220 Industrial Vacuum

 Download video of WS2220 in Action!

A - Modular Oval Construction, designed for flexibility, upgradeable

Modular Oval Industrial Vacuum Our modular oval construction offers the maximum design flexibility. Changes to the vacuum can easily be made in the field.

ie: change motor decks, add HEPA filtration

Industrial Vacuum with Oval Construction Oval vs Round

Our industrial vacuums were brilliantly engineered using the “Oval Principle”. Many other industrial vacuums are constructed using a standard round collection container, adding a filter and a motor. Ruwac’s are constructed with an oval shaped housing. This shaped has proven to be the most effective when dealing with fine dust.

Back To Top

B - Fiberglass Reinforced Compression Cast Composite, fully grounded

Ruwac manufactures all of our machines out of a compression cast composite. This material is put into a press at 900 tons of pressure, insuring a precise mold every time. The material will not rust, is dent free, and abrasion resistant. We warranty all compression cast components for life, guarantying you a long lasting vacuum. Every vacuum is fully grounded for safety.

Back To Top

C - Long Life Oversized Dustless filter system, 99.9% @ .5 microns

Industrial Vacuums with Dustless Filter System Every Ruwac Industrial Vacuum is designed for returning only clean air to the work environment. Our oversized standard filter is 99.9% efficient at .5 microns. This unique designed filter allows the operator to pick up fine material in large quantities, maintaining a low filter loading. Our average filter life is 5 to 7 years, (assuming proper maintenance) and carries a warranty of 3 years.

Industrial Vacuums with HEPA filters Some applications require even more filtration than our standard .5 microns. For these customers, HEPA, ULPA & Active Charcoal Filters are an available option on all our equipment. With our standard filtration down to .5 microns, you might never change your HEPA Filter!

Back To Top

D - Lever Actuated Drop-down Dust Pan for easy emptying

Lever Actuated Drop-Down Dust Pan What first impresses everyone about the Ruwac vacuum is the easy to empty drop down dustpan. Just lift the lever with your foot, and the dustpan is lowered to the floor. Push the vacuum forward, and the dustpan is easy to reach and empty. To replace the pan, no alignment needed, just push it under the vacuum and step down on the lever.

Back To Top

E - Tip resistant counter-balanced base, with low level hose inlet

Tip Resistant Industrial Vacuum Are you frustrated by your vacuum turning over all the time, either the vacuum weighs little, or it is a top heavy drum top model. With Ruwac’s low inlet and counter balanced base, the operator can pull the vacuum via the hose without ever tipping the machine over.

Back To Top

F - Individually cooled bypass motors for motor-bearing longevity

The Red Line of industrial vacuums uses only the highest quality dual stage by-pass motors available. These individually cooled motors bring in outside fresh air to cool the motors. Cheaper flow through type motors use the vacuumed air to cool the motors, and if they do not filter well, all that dust goes through the motor too.

Back To Top

G - Inclusive sound suppression for quiet operation

All of Ruwac’s industrial vacuums offer inclusive sound suppression. For the intermittent duty line sound levels range from 68-75 dBA.

Back To Top

H – Manual external filter shaker control for easy filter maintenance

With Ruwac’s oversized filters, maintenance is reduced to almost nothing. Each time you empty the dust pan, give the external shaker bar one or two shakes and you are ready to return to dust-free cleaning.

Reverse pulse filter cleaning using shop air and an electric motorized shaker is available on all Ruwac industrial vacuums.

Back To Top

I – Heavy duty non-marking casters: rear with locking brakes

Ruwac vacuums have large heavy duty non-marking swivel casters on the front and large heavy duty non-marking swivel casters, with brakes on the rear.

They are very durable and stay on!

Back To Top

J – Cast deflector to knock material out of the air stream

Our cast deflector knocks material out of the air stream so that none of the material you vacuum hits the filter directly. Material hits the deflector and then spins around our oval designed dust pan. This slows the material down even more, so only the finest material ever contacts the filter. This allows you to have much longer vacuum cycles and be more productive because time is not spent cleaning or replacing filters!

RECENT APPLICATIONS:

Back To Top

Contact Us for more information on the "Red Line" of industrial vacuums