Home > Products > Ruwac Industrial Vacuums > Wood Dust Containment > Powerbooster
Procedure for the LEC-220C Converter
Operating Guide - Read the complete instructions and safety information supplied with the LEC-220C Power Tap before use.
1. Test 110/120 volt outlets with outlet tester supplied with LEC-220C Power Tap to make sure the outlet is wired correctly and does not have a ground fault interrupter in the circuit.
2. Plug one of the LEC-220C Power Tap's cords into a 110/120 volt 20 amp outlet without ground fault interrupters in the circuits. When running the Eliminator 3000-220 it must be a 20 amp circuit.
3. Plug the other power cord into a different 20 amp outlet without ground fault interrupters in the circuits, using an extension cord of appropriate length. When running the Eliminator 3000-220 it must be a 20 amp circuit.
4. The amber lamp on the front cover will light when connection is made to an outlet on an independent circuit. If the lamp doesn't light, try different outlets until it does. (Technically, an "independent" circuit is one that is 180 degrees out of phase with the first. In practice, LEC-220C systems automatically test for this. No special knowledge or action is required by the user.)
#LEC-220C $ 220.00 includes
(1) Power Module 20 amp, 4400 watts with NEMA L6-20 locking outlet
(2) Adapters - 5-15P to 5-20R
(1) Outlet Tester
Specifications for LEC-220C Power Tap
INPUT:
Voltage: 108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase
Two 36 inch power cords, 20 amperes each line, NEMA 5-20 plugs
OUTPUT VOLTAGE:
Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)
OUTPUT POWER:
4400 watts continuous; 22,000 watts peak, typical at 220 volts.
OUTPUT CURRENT:
20 amps continuous
OUTPUT RECEPTACLE:
Locking, single, NEMA L6-20R
POWER CONSUMPTION: 8 watts, plus equipment connected
SIZE: 2.7 pounds, Approximately 6-1/2 inches x 5 inches x 3 inches
ENVIRONMENT:
35 to 95 degrees F, 85% relative humidity, max., non-condensing.
No explosive gases, dust or other materials.
Dry. Away from water, oils or other liquids.
Avoid excessive dust.
LIMITED WARRANTY: One year, see warranty page for full text.
Back to main Powerbooster page